Gore – small 15ml pot


A blood red colour fast drying liquid.



Description

Dirty Down Gore effect creates bloody strands right out of the pot. Dip your tool then touch to a model or prop. Vary the amount of goop to create thin or thick strands for a disturbingly realistic look.

Keep bottle sealed when not in use. Gore can be thinned if mixed with a small amount of acetone. If Gore becomes too dry, just mix a little acetone into the pot to make it runnier – if too much acetone is added leave the top off the pot to let a little evaporate until the correct consistency is achieved.

See “peel back” label for full health and hazard information. Use in well-ventilated area.


Usage Instructions:

  • Always clean the tool in spirit straight after use. Do not let the gore or snot fully harden onto any tool.
  • Run strands of gore or snot between surfaces and allow to dry.
  • Drying time varies depending on temperature – the warmer, the faster drying.


.